Network Switch:
Cisco QSFP-40G-LR4 Module:
Cisco QSFP-40G-LR4 Module is a optic fiber module that connects network devices with 40Gbps speed. This network module uses optical fiber technology for sending and receiving data remotely. Cisco QSFP-40G-LR4 Module uses for long distance and connecting devices such as network router and other network equipment together.
This Cisco fiber optic module used in data center networks and connecting network. most of businesses use this Cisco module for different networks that need data management and can send data to 10 km distance with 1310 nm wavelength. The speed of sending data in Cisco QSFP-40G-LR4 Module can be 44 GB.
You can buy this product in network equipment market, if you need to consult about equipping your network, contact with Atech expert sellers.
Specification of Cisco QSFP-40G-LR4 Module:
- Speed rate: 40G
- Wavelength: 1310nm
- Does not support FCoE
- Cable type: SMF
- Cable distance: 10km
- Power consumption: 3.5 Watts
- Pull Tab Color: blue
- Laser Class: 1
- Connector Type: LC
- Commercial temperature: 0 to 70°C (32 to 158°F)
- Storage temperature: -40 to 85°C (-40 to 185°F)
Other Recommended:
| Cable Type |
SMF |
|---|---|
| color |
Blue |
| Data Transfer Rate |
40G |
| Wavelength |
1310nm |
| Maximum Distance |
10km |
| Power Consumption |
3.5 W |
| FCoE |
Does not support |
| Operation temperature |
min: 0° & max: 70° |
| Dimension |
13.5 x 18.4 x 72.4 mm |
Only logged in customers who have purchased this product may leave a review.
Related products
Cisco Fiber Module SFP-10G-SR-S
The Cisco Fiber Optic Module SFP-10G-SR-S is a 10 Gigabit Ethernet SFP+ transceiver module designed for short-range connections over multimode fiber (MMF). Operating at an 850 nm wavelength, it supports 10GBASE-SR standard and provides a transmission distance of up to 300 meters on OM3 fiber and 400 meters on OM4 fiber, using an LC duplex connector.
Cisco Fiber Optic Module SFP-10G-LR
The Cisco fiber optic module SFP-10G-LR is a 10 Gigabit Ethernet Small Form-Factor Pluggable (SFP+) transceiver module designed for long-range fiber optic communication. It operates over single-mode fiber (SMF) using 1310 nm wavelength and typically supports distances up to 10 kilometers.
Cisco Fiber Optic Module WSP-Q40GLR4L Extender Transceiver
The Cisco fiber optic module WSP-Q40GLR4L is a QSFP+ fiber optic transceiver designed for 40-Gigabit Ethernet connections over single-mode fiber (SMF).
Cisco Fiber Optic Module X2-10G-LR
The Cisco fiber optic module X2-10G-LR is a hot-pluggable 10 Gigabit Ethernet optical transceiver module designed for long-distance fiber optic communication. It uses the X2 form factor, which is an older, larger standard compared to modern SFP+ optics.
Cisco Fiber Optic Module X2-10GB-SR
The Cisco X2-10GB-SR is an optical transceiver module designed to provide 10 Gigabit Ethernet connectivity over short distances using multimode fiber (MMF). It is built on the X2 form factor, which was widely used in earlier generations of Cisco hardware for 10GbE connections. Compared to newer form factors like SFP+, the X2 module is physically larger and consumes more power, but it remains an essential component for organizations maintaining legacy Cisco networking equipment.
Reviews
There are no reviews yet.